- All Posts

Electric truck motor selection affects energy consumption and driving performance. Learn how to match rated power, peak power, torque and drivetrain configuration to different light truck operating conditions.

Compare single-motor and dual-motor electric axles for heavy-duty trucks. Explore real product specifications, transmission configurations and key engineering considerations.

Learn how air-heated and coolant-heated PTC heaters work in electric vehicles. Compare their structures, applications, and roles in battery thermal management.

An in-depth overview of electric vehicle control systems, covering VCU architecture, CAN bus communication, subsystem integration, high-voltage power management, fault diagnosis, and key vehicle control strategies.

A practical guide to electric garbage truck chassis selection, covering weight limits, axle-load distribution, battery packaging, powertrain matching, body configurations and compliance requirements.

Excerpt Selecting an electric axle starts with the vehicle and its operating conditions. This guide covers axle load, wheel torque, road conditions, duty cycle and chassis integration for commercial vehicle applications.

Understand rated power vs peak power in commercial EV motors, including output duration, torque, thermal limits and motor selection for the duty cycle.

Learn how rated power, peak power, torque, speed, voltage, cooling and duty cycle affect electric motor selection for commercial trucks and buses.

Compare central electric drive and integrated eAxle architectures for commercial vehicles. Learn how chassis layout, duty cycle, torque needs and integration scope guide selection.

An engineering overview of common bus suspension configurations. This article compares dependent and independent architectures and examines the structural characteristics and trade-offs of steel leaf springs, coil springs, torsion bars, air springs, and composite materials.

Explore four technologies shaping the electric heavy-duty truck central drive system: hairpin windings, oil cooling, 3-in-1 integration, and dual-motor configurations.

Explore bus body structure types, including body-on-frame, monocoque bus bodies, fully stamped sheet-metal bodies, and frame-and-skin construction.

This article examines electric bus chassis integration using a 6.5 m battery-electric bus as an example, covering three-section frame structures, mounting plates, welded brackets, and key body-to-chassis connection areas.

Compare single-pack and dual-pack electric light truck battery layouts, including weight, chassis packaging, drivetrain compatibility, and safety.

Selecting an electric light truck braking system depends on vehicle load, driving speed, road conditions, braking frequency, and vehicle architecture. This guide compares disc and drum brakes, air brakes, wedge brakes, EHB, and electronic parking brakes for commercial EV platforms.

Selecting an electric bus motor cannot be done in isolation from the motor controller and the mechanical drivetrain. An electric traction motor’s performance envelope is fundamentally constrained by the inverter’s current limits and thermal capacity.

Our 4.5T electric refrigerated truck is designed for urban and suburban temperature-controlled delivery, including the transport of fresh produce, dairy products, pharmaceuticals, and other temperature-sensitive goods.

For electric buses operating in both hot and cold climates, an effective battery thermal management system (BTMS) is an important part of the vehicle's battery system.

We provide electric wheel loader powertrain systems in both battery-electric and series-hybrid configurations. The traction system uses an electric motor combined with a 2-speed AMT transmission.

This article reviews the basic architecture and control logic of EHPS and EPS, and discusses the potential role of SBW in future electric light trucks.

The Dual-Source Electro-Hydraulic Power Steering Pump provides a backup drive path for electro-hydraulic steering systems used in electric vehicles. It combines a vane-type hydraulic pump with a dual-winding permanent magnet synchronous motor, using separate high-voltage and low-voltage power circuits.

An engineering analysis of motor sizing for 115-ton mining excavator electrification. Learn why continuous hydraulic demand and duty cycles dictate motor power.

A practical guide to mining equipment electrification across open-pit and underground operations. Explore core drivers, execution control points, and TCO payback.

This case study examines the electrification of a 45-ton mining dump truck at a cement mine, comparing energy consumption and operating performance.

When evaluating an electric central drive vs electric axle architecture for heavy-duty commercial EVs, the selection is not about theoretical superiority.

This 13T electric truck axle combines a single traction motor with a four-speed transmission for 4×2 and 6×4 heavy-duty truck applications.

A production-proven 5.5t–6.5t integrated electric drive axle designed for 7–8 meter buses, urban logistics trucks, and specialty commercial chassis.

The on-board charger is transitioning from a unidirectional power converter into a bidirectional energy hub. This article details the technical requirements for V2G and V2L operation, as well as hardware integration trends including CCUs and motor-drive power sharing.

An on-board charger (OBC) is a key part of an electric vehicle's charging system, converting AC power from the grid into regulated DC power for the battery. This article explains how an EV on-board charger works and the engineering requirements behind its design.

600V-class systems remain widely used in electric buses, but 800V and higher-voltage platforms are gaining attention.

A real-world case study of integrating our 9.9 kW three-phase 800 V OBC and 3 kW DC-DC converter into an off-highway electrification project, including Type 2 EVSE and CAN communication support.

A real-world case study examining electric axles for heavy-duty trucks in port operations, with field data from short-distance and short- to medium-distance transport.

Battery placement is becoming an increasingly important consideration in electric heavy truck development. Different electric heavy truck battery layouts can affect vehicle range, payload capacity, handling, charging or battery-swapping options, ground clearance, and overall vehicle packaging.

Selecting EV traction motors for electric light trucks requires more than comparing peak power and torque.

This case study covers the integration of an 800V bidirectional OBC + DC/DC system into a premium SUV, from prototype testing and CAN integration to vehicle-level validation and mass production.

A production-proven 6.6 kW bidirectional OBC integrated with a 2.5 kW DC/DC converter, supporting V2L, liquid cooling, CAN communication, and IP67.

An engineering guide to EV on-board chargers, covering OBC architectures, power topologies, 6.6 kW to 22 kW charging levels, 400 V and 800 V battery systems, OBC + DC/DC integration, thermal management, and bidirectional charging.

Explore onboard charger trends in 2026, including higher-voltage architectures, power density, system integration, SiC and GaN, and bidirectional charging.

A proven electric truck chassis platform already in batch production and exported to international markets including the Philippines, South Korea and Ecuador.

A proven electric minibus platform available as a complete vehicle or chassis-only configuration, with flexible seating, body and vehicle options for different passenger transport applications.

Explore our electric chassis for bus applications in Thailand, developed for a dual-purpose vehicle with 300+ km range and a proven EV platform.









